VIFLY WhoopStor is the first 1S whoop battery charger with storage. Besides charging the battery to full voltage, it can start the charger or discharger automatically to get your battery into storage voltage. The charging status is displayed clearly on the OLED screen like the battery voltage, charge current, etc.
What’s new of WhoopStor 3?
- Increased the maximum charge current from 0.9A to 1.3A, charges much faster especially for large capacity batteries like 850mah.
- Open the tooling for the case around, no more exposed parts.
- Change to a colorful LED screen, each cell current also can be displayed.
- Added fan and big heatsink for heat dissipating, the discharging efficiency improves a lot.
- Add the buzzer to beep when the charging finishes.
- Now remembers last current setting, no need to set the current each time.
- Supports 6S battery input.
- Remove all switches, all operations are through the two buttons, that is much easier
Features:
6 Individual Ports, PH2.0 and BT2.0 Compatible
The VIFLY WhoopStor 3 can charge 6 batteries at the same time. These are 6 individual charging channels, not charging parallel, but rather individually, you don’t have to worry about making sure the batteries are all the same voltage and same size. It is compatible with both PH 2.0 and BT 2.0 connectors and you can mix charge BT2.0 and PH2.0 battery at the same time.
Type-C, XT60 and DC Input
VIFLY WhoopStor supports Type-C, XT60 and DC power input. Type-C used PD and QC
protocol that supports fast charge at 9V and 12V, but it not supports regular 5V USB charge.
Regular and HV Battery Supported
VIFLY WhoopStor 1S charger supports both regular battery at 4.2V and high voltage battery at 4.35V. You can switch it easily with the button.
Heat Sink to Cool the Unit
The big heat sink below the PCB board would effectively dissipate the heat to
prevent the unit from overheating when charging or discharging.
Specifications:
- Dimensions: 101*49*22mm
- Input connector: XT60, DC(5.5*2.1mm), USB-C（PD3.0, QC2.0, BC1.2）
- Input voltage range: 7V-21V (XT60 2S-5S Battery, DC), 9V / 12V (USB-C）
- Max input power: 30W
- Max charging current: 0.9A/port
- Support battery connector: PH2.0 & BT2.0
- Battery type: LiHV 4.35V (±0.05V) / LiPO 4.2V(±0.05V)
- Storage voltage: 3.85V(±0.05V)
- Max discharge power: 1W/port
Package Includes:
- 1 x ViFly WhoopStor 3 – 1S LiPo LiHV 6 Channel DC USB-C Battery Charger & Discharger for BT2.0 & PH2.0
