VIFLY StoreSafe Smart LiPo Battery Discharger to Storage Voltage with Heatsink for 2S-6S RC FPV Drone Battery

• Intelligently Discharge Your LiPo Batteries to Storage Voltage
  • Never keep your battery at full voltage considering the safety issues and battery life. VIFLY StoreSafe is the best solution to discharge and maintain your LiPo batteries. With the advanced algorithm and built-in temperature sensor, VIFLY StoreSafe LiPo battery discharger can intelligently adjust the discharge speed according to the battery voltage and unit temperature. It ensures the highest discharge rate in an appropriate temperature range.

• Heatsink Technology Keeps The Batteries and Discharger Cool
  • In addition to the built-in temperature sensor to control the unit temp, the heatsink effectively dissipates the heat to prevent the discharger from overheating.

• Automatically Identifies 2S to 6S Batteries
  • The VIFLY StoreSafe LiPo discharger is compatible with 2S to 6S batteries. When plugged in, the VIFLY StoreSafe recognizes the battery type automatically; there is no need to do any extra setting to select different battery types. It is super simple and convenient!

• Easy-to-use, Plug-in and Leave it Alone
  • The StoreSafe will stop discharging when your battery reaches storage voltage and then goes into an ultra-low leakage current so the unit can be left for long time without over-discharging the battery. Just plug in and leave it alone.

Note: Please use ONLY when the voltage of each battery cell is higher than 3.95V.

After plugging in the battery, the LEDs  indicate the cell number (2S-6S) and will flash for about 5 seconds and then enter the discharging state.

If the LED status does not indicate correctly, please disconnect the battery immediately.

The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low leakage current (<10uA)