Here comes Mobula8 2S Digital HD FPV series with Walksnail Avatar System, New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video.
Features:
- Digital HD FPV experience
- New CrazyF405 ELRS HD flight controller
- Powerful and Smooth
- UART ExpressLRS receiver
- Built-in blackbox for Gyroflow and PID Tune
Specifications:
Motor
- Mode: EX1103 KV11000
- Configu-ration:9N12P
- Stator Diamter:11mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
- Weight(g):3.8g
- No.of Cells(Lipo):1-2S
Propellers
- Weight:0.88g
- Material: PC
- Pitch:2.3inch
- Props Dia:52.17mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Flight Controller
- MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
- GYRO Sensor: BMI270 (SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Serial ExpressLRS 2.4G
- Built-in BMP280 Barometer
- Built-in 8MBp blackbox
- Built-in voltage meter sensor , voltage meter scale 110
- Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeli_S Bluejay firmware
- Factory firmware: Bluejay ESC V0.19
- Firmware target: Z-H-30
- Default protocol: DSHOT300
- When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
Onboard UART ExpressLRS 2.4GHz Receiver
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Default firmware version: ExpressLRS V3.0.1
- Firmware target: HappyModel EP 2400 RX
- Could update firmware via ExpressLRS configurator
** If bound to radio but having trouble seeing stick movement in Betaflight, then you may need to turn off the “Model Match” factory setting in the ELRS web GUI.
Walksnail version
- Camera Model Avatar lite camera
- Image Sensor 1/2.7”1nch
- Resolution 1080P/60fps,720P/120fps,720P/60fps
- Ratio 16/9 4/3
- Lens 2.1mm
- FOV 170°
- Aperture F2.0
- Rolling shutter
- Min.Illumination 0.001Lux
- Weight 1.8g
- Dimensions 14*14*16mm
- VTX Model Avatar mini 1s module
- Communication Frequency 5.725-5.850GHz
- Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
- Mounting Holes 25.5*25.5mm
- Dimensions 30*30*6.5mm
- Storage 8G
- Recording 1080p/720p
- Weight 5.1g
- Operating Temperature -20-40℃
- Channels 8
- Wide Power Input 3.1V-5V
- Supported FC System Betaflight
- OSD Canvas mode
- Bitrate 25mbps 50mbps
- Latency Average delay 22ms
- Antenna IPEX
Package Includes:
- 1x Mobula8 Frame
- 1x CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4
- 4x EX1103 KV11000 brushless motor
- 1x Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)
- 1x Walksnail avatar HD Mini 1S lite kit
- 1x Canopy(DJI O3/Walksnail/HDZERO optional)
- 1x Screw driver
